Westate Pumps
Westate Pumps, manufactured in Australia, are close coupled units suitable for irrigation and industrial use.
These pumps are suitable for 3 phase 380/415 volts 50Hz or 220/240 volts 60Hz supplies.
- Pumps are thoroughly tested prior to dispatch
- All pump castings of high grade cast iron
- Pumps are fitted with low maintenance, Viton mechanical seals
- Accurately balanced impeller for maximum efficiency
Only uses Hot Water + Detergent
Auto Pump out of waste
Auto Water Level Top
Gear Driven Turntable
60% Better Cleaning Efficiency
Heavy Duty Aussie Made
models specs
| Kilowatts | 2.2kW |
| Phase | 1ϕ |
| RPM | 2885 |
| A (length) | 140mm |
| B (length) | 125mm |
| C (length) | 130mm |
| H (length) | 90mm |
| H2 (length) | 146mm |
| L (length) | 490mm |
| L2 (length) | 424mm |
| Kilowatts | 2.2kW |
| Phase | 3ϕ |
| RPM | 2900 |
| A (length) | 140mm |
| B (length) | 125mm |
| C (length) | 130mm |
| H (length) | 90mm |
| H2 (length) | 146mm |
| L (length) | 420mm |
| L2 (length) | 354mm |
| Kilowatts | 2.2kW |
| Phase | 3ϕ |
| RPM | 2900 |
| A (length) | 140mm |
| B (length) | 125mm |
| C (length) | 130mm |
| H (length) | 90mm |
| H2 (length) | 146mm |
| L (length) | 420mm |
| L2 (length) | 354mm |
| Kilowatts | 5.5kW |
| Phase | 3ϕ |
| RPM | 2900 |
| A (length) | 216mm |
| B (length) | 140mm |
| C (length) | 203mm |
| H (length) | 132mm |
| L (length) | 502mm |
| L2 (length) | 413mm |
case studies
“Maskill is the leading undercarriage solutions provider in Australia. We engaged Apollo Engineering to design, develop and manufacture a parts washer to eliminate the need for us to manually high pressure clean the undercarriage components. Apollo worked with us through the entire process to ensure we got what we needed. Like any prototype, we had initial teething issues but Apollo supported us every step of the way! By automating our cleaning processes, we’re saving hours per job!”
– Casey Maskill, Supply Manager
“Apollo’s laser cutting services have become pivotal to Walters Fencing, eliminating the difficult task of fabricating by hand and minimising the time spent on machining and fabrication. We’ve maintained a good relationship with Apollo over the years. The team are very friendly, engaging and reliable and continue to assist in achieving desired outcomes that help our business grow.”
– Don Pollard – Lead Designer/ Production Manager
“We have been dealing with Apollo for a number of years as a result of their flexibility and experience. Apollo can complete any job we require and we are proud to have a local engineering company supporting our manufacturing efforts. We have noticed rapid improvements and expansion in Apollo’s services as a result of their constant installation and advancement of machinery. The ability to source custom parts locally by utilising their laser cutting services is a huge benefit. The team at Apollo always provide quality products with good service.”
– Gavin Scott, Research & Development
